How Often Should You Inspect Your Fire Alarm System?
Everyone dreads the day when fire alarm systems are being tested because they are often loud and annoying. However, the importance of making sure your fire alarms are working properly outweighs the small distraction of lights and noise. Putting off a fire alarm inspection can be both risky and negligent for business owners as it puts both employees and property at risk.
Moreover, putting off inspections and testing may put you into contempt of your local regulations. It is your responsibility to make sure your fire alarms are in proper functioning order in your home, and that applies to your business as well.
New Equipment or Updates
The original test to check any new equipment in your business is referred to as Initial Acceptance Testing in NFPA 72, 14.4.1.1, and there are Reacceptance Tests outlined in NFPA 72, 14.4.1.2.
These tests will help you to make sure that your new equipment and systems are working. Even new equipment can experience issues or be set up improperly. When updates are made, you will need to double-check that all your equipment continues to communicate correctly. Problems can arise with updates if your equipment is old and not supported on new systems.
Visual Checks
At FSS Technologies, we recommend you do routine visual system checks monthly to ensure that your smoke detectors are functioning, emergency doors are clear from obstructions, and your alarm system notifications are working. These tests can be done quickly and outside working hours, so they do not interrupt your team’s work.
These visual checks include looking for obstructions in front of your doors, obvious cracks or issues with lights or equipment. You should also make sure that none of the warning system lights are on for any of your control panels or equipment.
Quarterly Inspections
You should be doing a thorough inspection of your entire fire alarm system every quarter. These quarterly tests should include cleaning the dust that can accumulate around the sensors of the smoke detectors. Dust and debris on smoke detectors can make them less efficient at detecting a fire.
These detailed inspections should include a visual check of your batteries for corrosion and review the connections or any wires that might be out of place.
During your thorough check, you should refer to NFPA 72, Chapter 14, for more details. Your local jurisdiction might have different requirements that you need to adhere to as well.
Testing
Functional testing is essential as well because visual checks cannot show you any technical problems with your system. This kind of testing is done by professionals to ensure that your fire system and detection devices are working. A professional team will test everything from your system’s alarms to the connection between your system and the monitoring system (if you have one).
FSS Technologies conducts fire alarm testing to ensure that your equipment is functioning and meets the appropriate standards for your local jurisdiction. Our experts will check each piece of the warning system, from sound alarms to strobe lights, as well as the different elements of the control panel. For FSS Technologies customers, we will be able to seamlessly communicate with our monitoring team to ensure the systems are synced.
If you want to get started with a new fire monitoring system or are looking for a professional inspector, contact your local security pros at FSS Technologies.
Explore Our Other Blogs
7 Ways Home Monitoring Keeps Your Pets Safe
Your family’s safety is at the forefront of your mind when installing a security system, and that includes your pets as well. When researching a security product that suits your needs, consider the ways that this technology can help your pets stay safe too. We have detailed some of the most common hazards as well…
What to Know About Smart Locks
Smart locks have been on the market for several years and continually gain features as technology advances. Learn how useful they can be and how to find the best option for your home or business. What’s a smart lock? Smart locks are door locks controlled digitally. These locks can be monitored and controlled by an…
How Much Data Does a Wifi Security Camera Use?
Internet Speed Bandwidth Internet bandwidth is a significant issue nowadays. Everything is tapping into the internet— from our phones to our refrigerators. If you’re installing internet protocol (IP) security cameras, they will inevitably use some of the bandwidth from your network. The question is, how much? When you purchase home internet service, you typically get…
Emergency Egress 101 for Commercial Buildings
When people think about emergency egress, they usually picture exit signs and the nearest door. In reality, egress is the entire route occupants rely on to get out quickly and safely—often under heightened stress, reduced visibility, and crowded conditions. When a means of egress isn’t clear or usable, even a minor emergency can turn into…
Holiday Security Tips
It’s a beautiful time of the year, but the holidays come with some inherent risks that you should prepare for amidst all the gift buying, cooking, and decorating. Here are some of our top holiday safety tips to keep your home and loved ones safe over the season. Theft and Burglary Prevention Do not put…
5G Security Concerns & the 3G Sunset
Consumers are using the internet on the go more than ever. By 2022, it is projected that consumers will utilize nearly 11GB of data per month, primarily due to video consumption. To create a more robust and long-term solution, technology infrastructure is working towards the next generation of mobile networks: 5G. With this network upgrade…
The Only SimpliSafe Review You Need to Read
What is SimpliSafe? SimpliSafe is one of several do-it-yourself home security systems on the market. The challenge with any DIY home security system, in our opinion, comes down to the customer experience. SimpliSafe’s customer support offers minimal assistance to ensure you adequately install and troubleshoot your system. While they do provide an 800-telephone number, the…
How to Conduct a Physical Security Audit
Protecting your livelihood is at the top of every business owner’s mind, but how do you know if your business is truly protected? By performing a physical security audit, you can fully assess any threats that your business might be subject to and take the necessary steps to mitigate those threats. During a physical security audit, each aspect of the business and its security…
Is the Use of CCTV Cameras in the Workplace Illegal?
Know the Law Business owners are responsible for the security and well-being of their employees and company property. Many companies use technology such as cameras, motion detectors, and other tools to keep an eye on their building or cash areas. Many new businesses and employees may be wondering: Are CCTV cameras illegal in the workplace? Let’s…
Where Should Fire Alarm Pull Stations Be Located?
While they generally go unnoticed until a moment of need, fire alarm pull stations are an integral part of a business or large residential building’s commercial fire system. What is a fire alarm pull station? As opposed to a smoke detector or sensor, human intervention activates a manual pull station and is the catalyst for setting…