Blog

False alarms on home security systems are not only an annoyance for homeowners, but they take up the valuable time and resources of our local law enforcement officials. In fact, many cities and towns now charge homeowners a fee for false alarms.  

In order to save you the frustration and potential financial hit, let’s look at the most common culprits that tend to set off your home security system. 

What causes false alarms?
 

Motion Detectors 

Motion detectors are a standard feature on many home security systems. When monitoring the exterior of a house, these sensors can be paired with lights, that illuminate your front or backyard if they detect motion or integrated into cameras that start recording when they sense movement in a given area. Other than occasionally annoying your neighbor, these motion-activated features are relatively harmless when triggered erroneously. 
 
However, when motion sensors are paired with an alarm that emits a loud warning siren or alerts local authorities, causing a false alarm, you can run into issues. These kind of motion detectors are often used within the interior of a home, and they work in a variety of ways. Some detect changes in the heat of an area, some detect changes in sound waves, and some emit radar waves or infrared energy to sense changes in a given spot. 

Unfortunately, there also are numerous ways that motion detectors can be “tricked” into action. 

• The movement of blinds or curtains 

• Pets 

• Wildlife or insects 

• Heating vents 

• Hot sun shining directly on them 

• Ceiling fan 

• Strong winds, lightning, or thunder 

• A dog barking too close 

• Fireworks 

• Air pressure changes 

The movement of blinds or curtains 

Pets 

Wildlife or insects 

Heating vents 

Hot sun shining directly on them 

Ceiling fan 

Strong winds, lightning, or thunder 

A dog barking too close 

Fireworks 

Air pressure changes 

The best way to prevent these types of false alarms is to install motion detectors correctly from the get-go. Moreover, we’ll get into issues that arise from improper installation in just a moment, but other ways you can prevent false alarms on your motion detectors is to clean the equipment regularly to prevent the build-up of dead bugs, spider webs, and other dirt and debris. Spraying an insect repellant around cameras and sensors can also help keep away the creepy crawlers. 
 

Incorrect Installation 

Motion detector technology works through various mechanisms and falls into one of two buckets: active sensors or passive sensors. You can read more about the differences between these sensors in our blog. The best motion detectors utilize dual-tech technology (both passive and active sensors) to help cut down on false alarms. 
 
What is essential during set-up is that components are correctly aligned and installed according to the manufacturer’s recommendations. Additionally, you can take the following preventative measures. 

• Install outdoor components in an area where wind and rain can’t impact them. 

• Placing packets of silica gel inside outdoor cameras and alarms can help keep component dry. 

• Invest in a security system with a good ingress protection (IP) rating. This is a code published by the International Electrotechnical Commission that classifies and rates the degree of protection provided against the intrusion of dust, accidental contact, and water. 

• Adjust camera sensitivities correctly. 

• Place equipment in places where household pets can’t easily disturb it. 

Install outdoor components in an area where wind and rain can’t impact them. 

Placing packets of silica gel inside outdoor cameras and alarms can help keep component dry. 

Invest in a security system with a good ingress protection (IP) rating. This is a code published by the International Electrotechnical Commission that classifies and rates the degree of protection provided against the intrusion of dust, accidental contact, and water. 

Adjust camera sensitivities correctly. 

Place equipment in places where household pets can’t easily disturb it. 

Low Batteries 

If the power source for your security system fails, it can cause a false alarm. With the abundance of wireless equipment on the market today, low batteries are a common source of problems. Read the manufacturer’s recommendations for how long the batteries in your equipment should last and schedule regular battery replacements accordingly. It’s a good idea to always keep spare batteries on-hand for your security system components. 
 

Unlocked or Loose Doors and Windows 

Another common cause of false alarms is unlocked or loose doors and windows. Window and door security devices usually consist of a two-piece sensor with magnetic contacts, one installed on the frame and one on the window or door. If the connection between the two contacts breaks, the alarm sounds. 
 
Wind can blow a partially closed door or window wide open, and pets have been known to open unlocked doors. Even changes in the weather can cause doors and windows to swell or contract, preventing them from closing properly. 
 
Make it a habit to check that all doors and windows are properly closed and locked before arming your alarm system.
 

User Error 

To err is human and that’s especially true when it comes to home security systems. User error is the number one most common reason for false alarms. The kids forgot the passcode. You forgot to tell your neighbor feeding the cat that the alarm is armed. A housecleaner or contractor enters your house and isn’t familiar with how to work your alarm system, even though you gave him or her the code. Mistakes happen, but luckily there are lots of simple steps you can take to prevent these types of false alarms: 

• Train anyone entering your house on how to use the alarm system properly. 

• Require dual verification before authorities are dispatched to your home in the event the alarm goes off. This means that the monitoring company calls you before calling the authorities. 

• Make sure your monitoring company has your current contact information. 

• Use technology, such as smartphone notifications or text messages that alert you when your alarm goes off, so you can disarm it faster. 

• Keep the user manual for the alarm system in an easily accessible place and make sure your family knows where it is as well. 

Train anyone entering your house on how to use the alarm system properly. 

Require dual verification before authorities are dispatched to your home in the event the alarm goes off. This means that the monitoring company calls you before calling the authorities. 

Make sure your monitoring company has your current contact information. 

Use technology, such as smartphone notifications or text messages that alert you when your alarm goes off, so you can disarm it faster. 

Keep the user manual for the alarm system in an easily accessible place and make sure your family knows where it is as well. 

Home security systems are a great investment and have numerous benefits. And as long as you take the time to install and maintain your system properly and follow the best practices laid in this article, your alarm system won’t end up being a headache for you and the local authorities.